OIL FILTERS – WORKING

By Arshia   www.zenithfilters.com

Keep your drive smooth with efficient engine oil filter from Zenith Filters.

As a premium OIL FILTER MANUFACTURERS IN INDIA.

Oil as the lifeline & act as blood of the engine in your car or truck

motorcycle, boat, airplane, tractor and so on.

Plain and simple.

   

But as the oil circulates through the engine, it picks up any number of contaminants like dirt. That dirt can obviously damage your engine. And over time, that dirt can bring the engine to its death.

OIL FILTER WORKING :-
Before  Engines did not use oil filters and, coupled with the poor quality of oil available at the time, vehicles required frequent oil changes. Eventually, the first full-flow oil filtration system was developed. Basically, for the oil to flow through the filter before it reached the critical working components inside the engine.

 Oil enters the oil filter through a series of pores on the outer side of the base flange. The oil

is then controlled through the filter, eventually leaves into the engine through the huge middle hole. Most oil filters are assembled with an anti-drainback valve like some kind of rubber membrane that covers the perimeter holes in the base flange. The membrane is forced aside as oil enters the filter case. When the engine stops working, the rubber membrane covers the holes. Obviously, the anti-drainback valves maintain oil within the filter. When the engine is started with no oil  they prevent engine dry starts.

So far so good, but still there are some cautions. The wide majority of pressurized lubrication systems establish in internal combustion engines incorporate some form of filter by-pass to protect the engine from starvation under certain circumstances. For instance , very cold weather. In this situation, if the oil is too thick, it is allowed to bypass the filter. Oil can also bypass the filter when the filter is plugged. Because of these events, oil is sometimes not filtered, even when the engine is fitted with a full-flow oil filter.